RF Receiver and Manual LED Controller RGB RGBW Controller 12-36V Stand alone UL CE Controller
Important: Read All Instructions Prior to Installation
Function introduction
Learning Key:
Pairing with RF remote
Product Data
RF Receiver& Manual LED Controller
| Output Power | 4x(60-180)W |
| Output Current | 4x5A |
| Power Supply | 12-36VDC |
| Temperature range | -20-+50°C |
| Relative humidity | 8% to 80% |
| Dimensions | 170x53.4x28mm |
RF Remote
| Output | RF signal |
| Operation Frequency | 869.5/916.5/434MHz |
| Power Supply | 3V(1xCR2025 battery) |
| Operating temperature | 0-40°C |
| Relative humidity | 8% to 80% |
| Dimensions | 136.3x38.9x10.7mm |
Safety & Warnings
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Wiring Diagram
Pair with RF receiver
Built-in 10 color changing modes are as follows:
Mode 1: Any two colors of RGB mix fade-in & fade-out
Mode 2: RGB three colors mix fade-in & fade-out
Mode 3: RGB three colors mix fade-out & fade-in
Mode 4: RGB flash
Mode 5: RGB three colors fade-in & fade-out successively
Mode 6: RGB three colors fade-in successively
Mode 7: RGB three colors fade-out successively
Mode 8: RGB three colors jump changing successively
Mode 9: R&B two colors mix fade (R in B out), then G fade-in, then R&B mix fade (R out B in), then G fade-out
Mode 10: B fade-out, then G&B mix fade (G out B in), then R&G mix fade (R out G in), then R fade-in
